1/04/2018

Canon Pixma MP810 Printer Driver Downloads - Windows, Mac, Linux

Canon Pixma MP810 Printer Driver Downloads

Canon Pixma MP810 Printer Driver Downloads - Windows, Mac, Linux
Canon Pixma MP810 Printer
Canon Pixma MP810 Driver, Scanner, Software Download  & Wireless Setup, Wifi Setting up, Setup Without CD/ DVD, Scan Utility Master Setup, Canon IJ Setup & Ink Cartridges- The Canon Pixma MP810 is a behemoth of a printer. It stands more than 18 inches wide, 16.5 inches deep, and 9 inches tall be sure you have the desk space. The 2006 aesthetic for the Pixma printers is dominated by a buffed silver plastic with glossy black accent panels. According to the Pixma MP800, the scanner lid opens to reveal an A4-size flatbed scanner. On the interior of the lid, supporting the platen protector, you'll discover the slide/negative scanner, as well as sleeves for holding slides and negatives. The lid detaches completely for scanning thick books.

Canon Pixma MP810 Driver-The largest change in this iteration is that the design and positioning of the control panel. The panel is embedded in the scanner lid, beneath a cover that flips up. The 3-inch trailer LCD is set into the bottom of the pay and will be half an inch smaller than the LCD on the Pixma MP800. It's a bit disappointing for you to obtain a smaller LCD for the same price, however 3 inches is still quite generous, and the images look great on the monitor. Rather than having job buttons for toggling between scan, copy, and print jobs, the Pixma MP810 uses a scroll wheel design for navigating menus. The numerous tasks and the settings menu have been set out in a ring around the LCD, and turning the scroll wheel turns the menu ring. Two soft keys let you select options on the display too. The scroll wheel menu is well designed and intuitive to browse. It is helpful to have the ability to see all of your top-menu options on a single screen.

The control panel aside, the Pixma MP810 provides a great deal of the very same features offered by the Pixma MP800: two input sources (tape and auto sheet feeder); built-in memory card slots; a PictBridge port; and an IrDA port. It's not network ready, but it is simple to network it with a router with a built-in printing server or a stand-alone print server. (If you want a network-ready printer, the Canon Pixma MP800R provides both wireless and wired networking.The features offered are standard to get a photo-centric all-in-one in this cost category.

In addition to the cyan, magenta, and yellow tanks are a dye-based black and a pigment-based black. Canon quotes cost-per-page to be about 29 cents for a 4x6 photo and about 3 cents to get a colour graphics print. Both numbers are good for an inkjet all-in-one.

Canon Pixma MP810 Specifications

  • Color Bubble Jet Print Speed (up to) Black: Up to 31 ppm (as fast as 2.0 seconds per page)1
  • Color: Up to 24 ppm (as fast as 2.5 seconds per page)1
  • 4 x 6 borderless photo - approx. 21 seconds1Number of Nozzles Black: 512
  • Color: 512 x 2 (Y, BK), 1,536 x 2 (C,M)
  • Picoliter Size (color) 1, 2, and 5 Picloliters Print Resolution (Up to)Black:600 x 600 dpi
  • Color:9600 x 2400 dpi
  • Paper Sizes Credit Card (2.13 x 3.39), 4 x 6, 4 x 8, 5 x 7, 8 x 10, Letter, Legal, U.S. # 10 envelopes
  • Copy Speed (up to) Black: 31 CPM (as fast as 2.0 seconds per page) / Color: 24 CPM (as fast as 2.5 seconds per page)
  • Scanning Element Charged-Coupled Device (CCD) Max. Resolutions Optical:4800 x 4800 dpi/ Interpolated: 19,200 x 19,200 dpi
  • Scanning Mode 48-bit internal/24 bit external

Canon Pixma MP810 Ink Compatibility

  • PGI-5BK Pigment Black
  • CLI-8BK Black
  • CLI-8C Cyan
  • CLI-8M Magenta
  • CLI-8Y Yellow

How to Reset a Canon Pixma MP810 Ink Cartridge

  • Remove the ink cartridge from your printer & insert the cartridge into the resetter's main channel.
  • Verify that the chip on your ink cartridge makes contact with the contact plate on the resetter.
  • Press down on the cartridge gently for several seconds. The LED light on the chip resetter will flash several times, indicating that contact has been made with the chip. Continue holding the cartridge in place until the LED light emits a steady light.
  • Remove the ink cartridge from the chip resetter & repeat the process with any other ink cartridges that need to be reset. Once completed, install the cartridges in your printer.

How To Setup Wireless Canon Pixma MP810 Printer.

  • Before Starting Wireless Connection Setup
  • Make sure that the printer is turned on.
  • If the power is on, the ON lamp will be lit.
  • If the Wireless lamp on the printer is flashing, press the Stop button.
Easy wireless connect
  • Press & hold the Wireless button & the Wireless lamp flashes
  • Press the Color button
  • Press the Wireless button repeatedly until the Network lamp lights up
  • Press the Color button.
  • Make sure the Wireless lamp flashes.
  • Return to the application screen & proceed with the setup.
WPS Connection
  • Make sure the button on the wireless router is ready to be pressed.
  • Press & hold the Wireless button & the Wireless lamp flashes.
  • Press the Color button.
  • Press the Wireless button repeatedly until the Direct lamp lights up.
  • Press the Color button, and make sure that the ON lamp & the Wireless lamp flash, then press & hold the button on the wireless router within 2 minutes.
  • Make sure the Wireless lamp is lit.
  • The network connection setup is now complete.
Using WPS (PIN Code) Connection
  • Press & hold the Wireless button on the printer until the Wireless lamp flashes.
  • Press the Color button
  • Press the Wireless button repeatedly until the Network lamp and the Direct lamp light up.
  • Press the Color button.
  • Press & hold the Stop button on the printer until the Alarm lamp flashes 16 times, and then release the Stop button after the sixteenth flash.
  • Follow the on-screen instructions on the device (such as a smartphone) to set the WPS PIN CODE described on the printed Network Configuration Page to the wireless router.
  • Make sure the Wireless lamp on the printer is lit.
Troubleshooting -WPS-

1. The Network Lamp & the Direct Lamp Light Up
  • Press the button on only one wireless router.
  • Check the wireless router security settings.
2. The Network Lamp Lights Up
  • Is the router or other network device turned on? If it is already turned on, turn it off,  and then turn it back on.
  • After checking the following points, wait a while and configure wireless connection settings again.

How To Install Canon Pixma MP810 Withoud CD/ DVD

  • Turn on your computer, when you want to install your printer driver.
  • Be sure your computer with CD / DVD drive.
  • Do not connect cable USB, waiting until you will be suggested connecting USB cable to computer.
  • Insert CD disk printer driver for CD/DVD drive to your computer & following setup wizard from CD with following all Instructions until finishing installations.
  • In doing wizard you have to connect a USB cable between printer & your computer, but you have to wait until you will be connected, this will be detections  printer  & go to the next step.
  • Following the direction wizard to finish installations processing.
  • Now you can print from printer, Canon Pixma MP810 as driver Installations.

How to Install Canon Pixma MP810 Printer Manual for Windows

  • Please download the driver.
  • Ensure the printer's USB cable is plugged into your computer or laptop.
  • Open the downloaded file, double click on the file, and then wait while the installer extracts the files to prepare for installation on your computer or laptop.
  • Follow the instructions that appear during installation.
  • When finished, restart your computer.
  • Then test print and scan.

Uninstall Canon Pixma MP810 Printer Driver for Windows

  • Open Control Panel, then click uninstall a program
  • Double click on the printer you want to uninstall, and then click ok
  • When the end of the uninstall wizard, click Finish.

How to Install Canon Pixma MP810 Printer Driver for Mac

  • Download printer driver from the above link which we have available.
  • Double-Click on .dmg Canon Archive.
  • Double-Click on the Driver.pkg.
  • The installer then simply Follow the Installation Wizard.
  • In few Minutes the Driver and Tools will be Successfully Installed.

Uninstall Canon Pixma MP810 Printer Driver for Mac

  • Open the Applications folder > Canon > Printer Software Uninstaller.
  • To uninstall printer software, click Continue.
  • Check the program you want to delete and click Uninstall.
  • Enter the password and click OK.

Compatibility - Supported Operating System

  • Win 10, Win 10 x64, Win 8.1, Win 8.1 x64, Win 8, Win 8 x64, Win 7, Win 7 x64, Win Vista, Win Vista x64, Win XP.
  • Mac OS X v10.12, OS X v10.11, OS X v10.10, Mac OS X v10.9, Mac OS X v10.8, Mac OS X v10.7, Mac OS X v10.6.
  • Linux deb, Linux rpm
  • Mobile Operating Systems: iOS, Android, Windows RT

Canon Pixma MP810 Printer Software and Driver Download

Download ⇔ Canon PIXMA MP810 CUPS Printer Driver
(OS X 10.5/10.6/10.7)

Download ⇔ Canon PIXMA MP810 MP Drivers
Windows 7, Windows Vista, Windows XP (64-bit)

Download ⇔ Canon PIXMA MP810 MP Drivers
Windows 2000, Windows 7, Windows Vista, Windows XP (32-bit)

Download ⇔ Canon PIXMA MP810 Printer Driver
OSX Mac OS X 10.2/Mac OS X 10.3/Mac OS X 10.4/Mac OS X 10.5

Download ⇔ Canon PIXMA MP810 Scanner Driver
(Mac OS X 10.2/10.3/10.4/10.5/10.6/10.7)

Download ⇔ Canon PIXMA MP810 Canon Inkjet Printer Driver Add-On Module
Windows 7, Windows 7 (64-bit)

Download ⇔ MP Navigator
(Windows 8.1/8.1 x64/8/8 x64/7/7 x64/Vista/Vista64/XP/XP x64/2000/Me/98)

Canon Pixma MP810 Printer Driver Downloads - Windows, Mac, Linux Rating: 4.5 Diposkan Oleh: M. David Stone